My new 2600 gallon plywood tank project

[Ramesh]

Ok after talking it over with Butch @ Pond Armor and Gerald @ Polymer Composites the general feeling is the structure is stable and it would be best to leave what it there in place and add this final layer of epoxy and fiberglass on top.

Will be starting after work tonight.

This is interesting because Butch has advised me not to another epoxy and fibre glass cloth or tape with pond armor.

 

[Ramesh]

Ok after talking it over with Butch @ Pond Armor and Gerald @ Polymer Composites the general feeling is the structure is stable and it would be best to leave what it there in place and add this final layer of epoxy and fiberglass on top.

Will be starting after work tonight.

This is interesting because Butch has advised me not to use another epoxy and fibre glass cloth or tape with pond armor.

 

[Tor-Eriik]

I would love for you to post alot of pictures when you do the fiberglass work, this is the exact same build as im going to start on in a few weeks, and it would be alot help, to se someone actually do the work Nice build again!

 

[snot]

Hope everything works out, long thread, very interesting indeed! Can't wait to see the finished tank all set up.

 

[VLDesign]

Will try to get as many photos as possible while doing the fiberglass. It's hard to stop in the middle and take pictures.

First coat of epoxy is down. With any luck and it dries enough I will be able to get the fiberglass down tonight as well.

Tank will be covered in a 3D background from Designs by Nature (http://www.designsbynature.net/) the color will not be seen once finished.

 

[Egon]

Dang that is big!

 

[Kyle_91]

You should pay people $3 bucks just to go into your basement and look at your tank lol.

- Great work though man, can't wait to see the 3d background!

 

[sheajared]

Refresh my memory if you've said it before... What's the stock list for this beast?

 

[doomiedee]

nice build , im plannig my first plywood tank , i will keep you in mind just in case i come across any problem

 

[VLDesign]

Remaining stock (After my mass die off) that will be in here is as follow:

5 x 11-18" ID sharks (One albino)
1 FRT (Maybe 2 depending on their moods when they meet)
2 x 8" Flag Tails
15 x Clown loaches sizes range from 5" to 13"
3 x 8" Leporinus

Will be looking to add a Lince cat as soon as I can locate someone who can ship with a live arrival guarantee.