Does anyone of you know anything about PCB? I have this stereo board and some spots looks like they're burnt, Is it still fixable or it's damaged for good?
View attachment 1225875
View attachment 1225875
04 g35 coupe stereo help with circuit board
- Thread starter koizilla714
- Start date
Burning on boards don't always mean the board itself is bad but it does usually weakens the inner circuits.
The other problem is what caused it? Mostly likely it's a part gone bad. If you can find the problem...great. Get a new part and change it. If not, it could be next to impossible to find it without an ICT tester made for it.
Most of the time in this case its better to replace the whole board.
The other problem is what caused it? Mostly likely it's a part gone bad. If you can find the problem...great. Get a new part and change it. If not, it could be next to impossible to find it without an ICT tester made for it.
Most of the time in this case its better to replace the whole board.
So I assume youre asking because it no longer works?
Im not even sure i'd call those burn marks, more of a discoloration. But no, a burnt up part doesnt necessarily mean the death of the board.
Im not even sure i'd call those burn marks, more of a discoloration. But no, a burnt up part doesnt necessarily mean the death of the board.
I came across this while googling
Video came from this thread http://g35driver.com/forums/audio-video-electronics/391401-climate-control-radio-repair-diy.html
Video came from this thread http://g35driver.com/forums/audio-video-electronics/391401-climate-control-radio-repair-diy.html
that's a relief, So it's still fixable just figure out what cause it and how to repair it. Thanks
I've already saw that vid and tried it but still not working for me, thanks for the effort tho