Aquarium Rack or Shelving System?

[Acro]

I'm looking to buy a shelving or rack system for my aquariums from Home Depot or Lowes, etc.
The setup will be like this:

• 75 gallon standard aquarium (48" x 18" x 21") on bottom.
• 50 Gallon Low Boy Aquarium (48″ x 24″ x 10″) in the middle as show tank. ( https://zoomed.com/wp-content/uploads/BFT-50S_Low_Boy_Breeder_Flat_Aquarium.jpg )
• 5 and 10 gallon aquariums on the 3rd and 4th (and 5th?) shelves.

What are some rack or shelving systems that you use (or would use) for this? I originally started to DIY, but I found that my skills weren't as fine tuned as I thought they were, also I am short on time and I want to get this done quickly, so I decided to buy instead. Some racks can hold 1500 lbs, 2250 lbs, 2500 lb per shelf so I'm thinking of something like this:

https://www.homedepot.com/p/DEWALT-...-in-W-x-72-in-H-x-24-in-D-DXST10000/302361205

https://www.homedepot.com/p/Husky-B...n-W-x-78-in-H-x-24-in-D-HBR782478W4/310651468

https://www.homedepot.com/p/Husky-R...-W-x-78-in-H-x-24-in-D-ERZ782478W4R/308458510

What do you think? Do you see any reason why this won't work? Would you go with something else?


.

 

[DMD123]

I use the smaller Dewalt racking for my garage setup.

I have 90 gallon tanks across to top with 65B’s below each one. The center rack has a 30 gallon. I did full 3/4” plywood for tanks to sit on and modified it for my use.

 

[TwoHedWlf]

That should be fine. I'd just put a piece of plywood on each shelf along with some poly on top of that. Just to make sure there aren't any high spots.

 

[DMD123]

I had posted a ton of info on setting it up here:

Weight Distribution of Aquarium on Shelving

I have seen @DMD123's fish room and the Dewalt racks look good.

www.monsterfishkeepers.com

 

[Acro]

Thanks everyone! I knew you' come through!