Nes999's 1,000 Gallon Plywood Build Mark Two

nes999

Feeder Fish
MFK Member
Mar 25, 2009
1,803
2
0
IL



This is the drain side to the floor drain. one hole at 20% 50% and as low as i can get. the holes are 2inch

This side is filtration. the 3 bottom holes and the hole right above the center bottom are RETURNS the rest are going to two ultimas 2,000's and 2 eheim 2262s' then center hole is to a ohf with right now 220liter of matrix.

These are Monster fans if you look at the lower leg of this fan their is a pop can for reference. im bondoing tomarrow so im useing two of these beasts and a 20inch. and maybe just maybe ill paint this weekend.
 

nes999

Feeder Fish
MFK Member
Mar 25, 2009
1,803
2
0
IL
just got done bondoing........and just found out i need to bondo more :( BUT GOOD News! im 99% sure im painting sunday ill have to do one more round of sanding tomarrow but im really sure ill painting sunday
 

john73738

Fire Eel
MFK Member
Nov 8, 2009
1,292
9
68
Las Vegas, NV
nes999;4572822; said:
I just got done sanding and bought everything i need to paint tomarrow. 3 coats at 4 hours between coats ill be their all day.

my coats are Light Blue, White, Light Blue.
Build looks great, Nice work, and looks very strong. Now my 2 cents :)

Be liberal with the epoxy paint, Don't paint on too thin.

I would go no less than 5 coats. First coat is gonna be real thin because it will soak into the wood, then will build up after that.

Remember you are holding in a lot of water and over built is better.

( I actually did 7 coats, had extra to get rid of)

Good luck.
 
zoomed.com
hikariusa.com
aqaimports.com
Store