Have you got your final resting site prepped for this beauty? I would move it before it all gets too heavy! Great job, like the simplicity and it's going to look really nice too. Professional. Nice one. Lookin forward to the next updates....
start to my diy 480 gallon timber pond (not finished)
- Thread starter midnight
- Start date
i built it about 10' from where its going so it shouldnt be to bad to move.
MrRngr,i will let ya know when to come help
thanks
update in a few min 1st pic, all the adaptors for my duel returns.
pics 2,3,4,one gallon of stain/sealer applied.
5,6,7,8,9,10, sides all screwed on with 1 5/8" deck screws.
guess i got the sides mixed up or something,they were tight.
oh well not redoing it cus of that.
also messed up by painting the edges of the plywood. "you can see some white"
might scrape it off.
pic 11 is the styrofoam
12,13,14,top pieces are just sitting there "had to see it with the top on again"
next is
overflow pipes
styrofoam
top wood
liner
filter
will update when theres more
pics 2,3,4,one gallon of stain/sealer applied.
5,6,7,8,9,10, sides all screwed on with 1 5/8" deck screws.
guess i got the sides mixed up or something,they were tight.
oh well not redoing it cus of that.
also messed up by painting the edges of the plywood. "you can see some white"
might scrape it off.
pic 11 is the styrofoam
12,13,14,top pieces are just sitting there "had to see it with the top on again"
next is
overflow pipes
styrofoam
top wood
liner
filter
will update when theres more
Haha! Sorry but I have 2 hernias. Otherwise I would have totally helped ya.midnight;869476; said:MrRngr,i will let ya know when to come help
made the returns.
1/2" pvc
i have some nail on clips and im going to use them to mount the returns under the top wood.
then im going to use flex hose the rest of the way to the pump.
im working on the overflows but no pics of that yet.
1/2" pvc
i have some nail on clips and im going to use them to mount the returns under the top wood.
then im going to use flex hose the rest of the way to the pump.
im working on the overflows but no pics of that yet.
