Normally 0 last time tested .5 normal range is 0-.5did you say your ammonia is normally at 0.5?
Normally 0 last time tested .5 normal range is 0-.5did you say your ammonia is normally at 0.5?
Water parameters are fine, over filtration and overstock is needed for a smaller 500g tank with monster fish that's common knowledge, it prevents aggression and territory disputes. 10k estimated. 5k pump 3k wave maker one side 1800 wavemKer other end let's fish choose which side what current, no issue. Only fish bad are RTC from bacterial infection I need to cure now. Thanks for the criticism I guess lol.Gonna start with the basics cos it’s what I see.
1 x 22” rtc
1x 16” rtc
4 x arrowana big enough not to be eaten by a22” rtc
1 x peacock bass big enough not to eaten as above
Pond size 500g !!!!!
Filtration 10000g per hr !!!!!!!
To me all the numbers are wrong and perfect for causing problems.
Pond is way too small for the fish in it and water turn over is too much for the quantity of water.
Is it the pump that is 10000gph
Is the filtration capable of 10000 gph through it? That filter will be almost half the size of the pond.
500g only equates to 7ft x 4ft x3 ft and that water being emptied and refilled 20 times an hour would be four arrowana living in a river.
Arrowana will lose interest first if temp drops much below 20 and you could start losing them much below that. 500g with a fast turn over like that will be good to pick up the heat from the room but works the other way if the room is cold and the water will cool faster. Depending how the pond is built and insulated it could also transmit cold through any concrete walls if used or un insulated liner adding to fluctuations.
Once you have remedied your current issues I think you may have to look at your current setup and change something.
Yes my bioload can handle it that's why it's 10k water flow to handle the ammonia they put out. As for the cats I quarantined in a 300g with medication for fin rot with good water quality and less water temp to fight the bacteria. Unfortunately they died. As for the aros and bass perfectly healthy no issues at allI guess people are wondering if your bio is sufficient as those fish have gotten bigger, my understanding is ammonia and nitrite should generally both be zero if there is enough media
I hope you get your big cats back to ship shape. Did you say the two surviving arros and the bass seem okay?
I get what you're saying. But I did **** my wording. Don't care anymore think what y'all want my guy from the forum who helped me setup 2 years ago told me why and gave me real criticism ?. Thanks for telling me things I guess.Okay...first, your bioload isn't what "handles" the ammonia, it's what produces the stuff. Biofiltration media is where the bacteria that do the handling live, and you must have enough of those bacteria...which means enough media...to take care of the ammonia that the bioload produces. The water flow really hasn't got much to do with it, except that it needs to be enough to pass the water over the active mature biomedia often enough per hour to do the job. We are talking strictly about flow rate through/over the biomedia in the filter; wavemakers don't count for this. They help with aeration and they help move solid waste into the mechanical filter, but they don't play much of a role in biofiltration.
If you have ammonia in measurable quantities with the kind of flow rate you are talking about, your bacterial colony isn't sufficient for the load; it's that simple. Is the volume of your biomedia insufficient, perhaps? Or has something caused a die-off of bacteria? If you are experiencing regular ammonia readings of 0.5, your fish are not perfectly healthy. You've lost four large fish all at once, which will reduce the ammonia production and perhaps allow your current filtration to handle what the remaining fish are putting out. But if you start adding more fish, or if your survivors simply continue to grow...you will be back in the same boat, i.e. too much ammonia produced for your filtration to convert.
Put simply: way too many fish that are way too big in way too small a tank to be properly maintained with your current methods.
Not tryna be an ass either really appreciate the criticism you might even be right but I highly doubt it and to each they own opinion right? But I'll take measures to prevent this.Okay...first, your bioload isn't what "handles" the ammonia, it's what produces the stuff. Biofiltration media is where the bacteria that do the handling live, and you must have enough of those bacteria...which means enough media...to take care of the ammonia that the bioload produces. The water flow really hasn't got much to do with it, except that it needs to be enough to pass the water over the active mature biomedia often enough per hour to do the job. We are talking strictly about flow rate through/over the biomedia in the filter; wavemakers don't count for this. They help with aeration and they help move solid waste into the mechanical filter, but they don't play much of a role in biofiltration.
If you have ammonia in measurable quantities with the kind of flow rate you are talking about, your bacterial colony isn't sufficient for the load; it's that simple. Is the volume of your biomedia insufficient, perhaps? Or has something caused a die-off of bacteria? If you are experiencing regular ammonia readings of 0.5, your fish are not perfectly healthy. You've lost four large fish all at once, which will reduce the ammonia production and perhaps allow your current filtration to handle what the remaining fish are putting out. But if you start adding more fish, or if your survivors simply continue to grow...you will be back in the same boat, i.e. too much ammonia produced for your filtration to convert.
Put simply: way too many fish that are way too big in way too small a tank to be properly maintained with your current methods.
Yes heater is fine now water was changed and the parameters are good ? and I have a YouTube channel it's BNDLLC it's a 8ft by 4ft by 2ft might have the length a foot off.Bummer about the cats. Did you get the room heater squared away?
Would love to see pics of your setup, what dimensions is your 500? Are all your tanks in the same fish room?
Firstly, apologies, it may sound like critisism (it does)but many of us have been there , been through the same and have got the t shirt.Water parameters are fine, over filtration and overstock is needed for a smaller 500g tank with monster fish that's common knowledge, it prevents aggression and territory disputes. 10k estimated. 5k pump 3k wave maker one side 1800 wavemKer other end let's fish choose which side what current, no issue. Only fish bad are RTC from bacterial infection I need to cure now. Thanks for the criticism I guess lol.