New to me but used Tenecor Aquarium (Tons of LARGE pics, SORRY!)

[Dawgz]

So I just picked this up off of FB market place. It looks decent, its 48L X 24W x 20H (really 19.5" height).

There are three areas of concern on this tank I wanted to get a second opinion on.

Front:





First area of concern, this is a view from the top panel of the right panel of the tank:






This is the top view of the left panel, this pattern goes on for about 3/4s of this panel at the top.

 

[Dawgz]

Ok next....

There is an inclusion (best I can describe it as) on the bottom front left panel. It does not look like a crack, I have taken a look at this in every angle, even tried from inside and I cannot make out what this is. It looks like it was a defect from factory? The outside and inside are smooth and this is not a chip from what I can tell. There is no glue outside (there is slight Weldon flooding inside, throughout the tank)










From inside the tank


Side view of the panel, cant see it if you look at it from the back direct left side of the bottom panel


Used light from another phone to shine from the top to maybe capture some of the shades of this thing.

 

[tlindsey]

Ok next....

There is an inclusion (best I can describe it as) on the bottom front left panel. It does not look like a crack, I have taken a look at this in every angle, even tried from inside and I cannot make out what this is. It looks like it was a defect from factory? The outside and inside are smooth and this is not a chip from what I can tell. There is no glue outside (there is slight Weldon flooding inside, throughout the tank)

View attachment 1557907

View attachment 1557908
View attachment 1557909
View attachment 1557910
View attachment 1557911
View attachment 1557912
View attachment 1557913

From inside the tank
View attachment 1557914

Side view of the panel, cant see it if you look at it from the back direct left side of the bottom panel
View attachment 1557915

Used light from another phone to shine from the top to maybe capture some of the shades of this thing.

View attachment 1557916

View attachment 1557917

View attachment 1557918
View attachment 1557919
View attachment 1557920

wednesday13
jjohnwm

 

[puffers4puffers]

I would fill that bad boy outside to confirm it holds water.
But in its current state I’m not confident it will
Good luck

 

[wednesday13]

Parts list lol … #40 seems to have fluctuated a bit like everything else. I can find it as low as $40 but up to $65 for a pint. Used to be $30 … just pulled this stuff up quick also. Im sure u can find things cheaper if u dig.

 

[Dawgz]

Parts list lol … #40 seems to have fluctuated a bit like everything else. I can find it as low as $40 but up to $65 for a pint. Used to be $30 … just pulled this stuff up quick also. Im sure u can find things cheaper if u dig.

View attachment 1557961

View attachment 1557960
View attachment 1557962View attachment 1557963View attachment 1557964

Awesome, thanks!

 

[Dawgz]

Got everything in!

 

[Dawgz]

Got everything in, just waiting on some warmer weather (60F and above) so that I can start this on my backyard patio...and not inside the house.