plexi being installed
bonding area sanded with 220 grit
wiped clean with mek
primed with Dow 1250 primer
sealed with Dow 832
silicone applied with an air powered caulking gun for speed. once applied the plexi was tilted into place and put under pressure by 2x4 braces to the back wall....applied enough pressure to have the silicone flow out to about 4 inches wide.
bonding area sanded with 220 grit
wiped clean with mek
primed with Dow 1250 primer
sealed with Dow 832
silicone applied with an air powered caulking gun for speed. once applied the plexi was tilted into place and put under pressure by 2x4 braces to the back wall....applied enough pressure to have the silicone flow out to about 4 inches wide.