My new 2600 gallon plywood tank project
- Thread starter VLDesign
- Start date
So let me just say that fiberglass work sucks. Huge pain in the ass to say the least.
It doesn't help that I have a surface that isn't smooth and I am getting tons of air bubbles in the glass.
So, I abandonded the plans to glass the entire tank and just did a few layers in all the corners.
And of course the camera is dead so no pictures at the moment.
Tomorrow I will put the final coat of epoxy down and let it cure the recommended 3-7 days before filling.
It doesn't help that I have a surface that isn't smooth and I am getting tons of air bubbles in the glass.
So, I abandonded the plans to glass the entire tank and just did a few layers in all the corners.
And of course the camera is dead so no pictures at the moment.
Tomorrow I will put the final coat of epoxy down and let it cure the recommended 3-7 days before filling.
PM sent.. And I want to say publicly that we have had our differences in the past and I really appreciate you willing to help me out.
Thanks
Wow. I admire you two for putting aside your differences and working together for the success of this project. That's what this site is all about.
Q: Can I use Flex Seal™ to seal the inside of a water tank used for drinking?
A: NO, we do not recommend that you use Flex Seal™ where it comes in direct contact with drinking water.
https://www.getflexseal.com/FAQ
No way around this build being an epic dedication to the hobby, you have to respect that.
