REACTORS- Filtration for stingrays

[DIDYSIS]

I don't think I posted my latest update on what it looks like so here it is.

Sent from the Monster Fish Keeping App

 

[snake8myelbo]

Looks good Kevin! You need to come make me one!

Sent from my C6606 using MonsterAquariaNetwork App

 

[snake8myelbo]

Best reactor container hands down. Its a little noisy because of the thin hard plastic but easy to drill for bulkheads and flat spots to fasten them. Im going to change out all my reactor containers with these. Also ive never had any problems with prazi foaming that much. Ive never had to unplug my reactors.

http://www.monsterfishkeepers.com/forums/showthread.php?t=551071


Sent from my iPhone using MonsterAquariaNetwork app

Trev where did you find this container? How many gallons and what's the dimensions

Sent from my C6606 using MonsterAquariaNetwork App

 

[vamptrev]

Its a typical sump pump container. I got it at my local hardware store, it was only 30 bucks. Still my absolute favorite reactor out of all 3 that i have. Its about 35 gallons, about 20" inches wide and 36" tall just guessing.


Sent from my iPhone using MonsterAquariaNetwork app

 

[snake8myelbo]

Its a typical sump pump container. I got it at my local hardware store, it was only 30 bucks. Still my absolute favorite reactor out of all 3 that i have. Its about 35 gallons, about 20" inches wide and 36" tall just guessing.


Sent from my iPhone using MonsterAquariaNetwork app

Thanks trev!

Sent from my C6606 using MonsterAquariaNetwork App

 

[scott s]

Great ideas and information.

Here's a few more pics of my reactor.

 

[vamptrev]

Scott s can you give a quick low down on how your filtration works? Looks like a container as a sump, one as a reactor, and what is the green one?


Sent from my iPhone using MonsterAquariaNetwork app

 

[isde02]

Scott s can you give a quick low down on how your filtration works? Looks like a container as a sump, one as a reactor, and what is the green one?


Sent from my iPhone using MonsterAquariaNetwork app

The green one is a Tetra Pond Bio-Active Pressure Filter, I use one too.

 

[shookONES]

I haven't read through this entire thread yet, but has anyone ran a reactor(s) plumbed inline with a canister filter return? I've been thinking of doing this for quite some time and was looking for some feedback. I was thinking of plumbing a Nextreef SMR1 to the return of my Eheim 2217. K1 is the media of choice here.

 

[mantilla]