New Tank Help

[OscarBaby]

any hardware store generally. The term weld here is...similar but not quite the same as what you are thinking. Weld-on 40 chemically welds acrylic panels together, all you have to do is mix it up and bead it on the area the two panels will meet and clamp them together. After that you can tip the tank up and pour more into the corner of the panels creating a much stronger bond.

Thank you. Around what dimensions would a 300 gal be? Just so I can measure it out

 

[predatorkeeper87]

Thank you. Around what dimensions would a 300 gal be? Just so I can measure it out

my 310 acrylic is 7x3x2.

 

[markstrimaran]

EBay has is also. It comes in" weld on 16," weld on 4" There any a few variety.

 

[OscarBaby]

Thank you all so much for the info, y'all have been great and I really appreciate it. If any one else has advice or ideas that would be grand of you Thank you

 

[predatorkeeper87]

EBay has is also. It comes in" weld on 16," weld on 4" There any a few variety.

do NOT use weld 16 or 4 for a whole tank assembly. weld on 40 only.

 

[markstrimaran]

do NOT use weld 16 or 4 for a whole tank assembly. weld on 40 only.

Be carefull, study up some. Remember some of us are sick with the flu, and have not slept much in the last three day. Lol.

 

[predatorkeeper87]

Be carefull, study up some. Remember some of us are sick with the flu, and have not slept much in the last three day. Lol.

lol no worries just didn't want OP to go buy a ton of 16 or 4 and then have 300 gallons of water explode into the neighbor's apt below.

 

[Deadliestviper7]

lol no worries just didn't want OP to go buy a ton of 16 or 4 and then have 300 gallons of water explode into the neighbor's apt below.

Makin it rain