ZENNZZO's duce duce five...

[zennzzo]

Decided to go with a proprietary pump for the UV...less connections on the main Pump means better reliability.

The UV is 18Watt, and I need the Dwell time in the housing, so I decided to use a ML 660 powerhead rated at 170gph...
I might add, of course Silicone J suggested this last week before I bought all the plumbing and realized how it could compromise the system...
Thanks Bro! told you I was a hardhead sometimes. So it will be on a switch of it's own to run the powerhead and UV light.

I am doing the wiring diagram now and will have it up for scrutiny shortly...

 

[zennzzo]

Plumbing without the UV in the main loop...



Overflow plumbing and return plumbing, back of tank



Dual 2" Drain pipes for overflow and single check valve on the 1.5" return



Check valve...I will put the clear tubing back in, on final Assembly.
notice the dry wood there, High-Nooner?


20 x 20 = 400 - .125" holes in the drip plate 1" centers
For who ever asked in an earlier post,
there are 400 - 1/8th" holes in the drip plate...


I want to thank PhullTank57 for all his support today... as always his expertise and experience was benificial in getting this much done...Thank you for reaching those places that needed reaching, as you can see my Vice grip hands are good for some things and Doomed for others...
I'd have to admit, the coffee wasn't as strong as the other day, but it sure was hot and tasty. Maybe tomorrow we can get the holding tank thing situated if you ever get your water changes done...
Oh Yeah, And I'll make the coffee...

 

[Hot Slime]

Very impressive setup you got there my friend! I like it

 

[zennzzo]

Very impressive setup you got there my friend! I like it

Thank You very much...I was looking for reliability, ease of maintainance, and a Beefy Heavy Duty look to the system...no tiny stuff here on this one...

 

[PhullTank57]

I want to thank PhullTank57 for all his support today... as always his expertise and experience was benificial in getting this much done...Thank you for reaching those places that needed reaching, as you can see my Vice grip hands are good for some things and Doomed for others...
I'd have to admit, the coffee wasn't as strong as the other day, but it sure was hot and tasty. Maybe tomorrow we can get the holding tank thing situated if you ever get your water changes done...
Oh Yeah, And I'll make the coffee...

Not a problem bro... always willing to lend a helping hand!
But I'll tell you what,,, we better get this thing a-moooovin' soon, like Pronto!!... Or the old lady just might have me a-sleeepin' outside with the fishes too?!! jus Jk!


Also btw, let's be sure to do and make all the required cuts we need to do with the PVC/Plumbing, during the DAY...Don't really want to be using the miter saw during the middle of the NIGHT again, making all that racket, waking up and disturbing the neighbors!!

"Silicone J", "Drill Bit Wet J", "I Told U So J",,, Etc. I have a feeling by the time we reach the end of this project, I should have a few more other names, as well?!!

 

[zennzzo]

Got it "spillage"...

Found the perfect TDS meter http://cgi.ebay.com/DUAL-TDS-METER-...sidZp1742.m153.l1262?_trksid=p1742.m153.l1262
and bought it...
and an RO-DI unit...it'll be perfect for this system...6 stage w/DI...and 100 gallons per day capability...all I need is to drip 10 a day....like .41GPH or 1/2 gallon an hour...
http://cgi.ebay.com/Reverse-Osmosis...sidZp1742.m153.l1262?_trksid=p1742.m153.l1262
better get clearance on this one huh? ....well maybe not we'll see how it goes...

 

[tcarswell]

Got it "spillage"...

Found the perfect TDS meter http://cgi.ebay.com/DUAL-TDS-METER-...sidZp1742.m153.l1262?_trksid=p1742.m153.l1262
and bought it...
and an RO-DI unit...it'll be perfect for this system...6 stage w/DI...and 100 gallons per day capability...all I need is to drip 10 a day....like .41GPH or 1/2 gallon an hour...
http://cgi.ebay.com/Reverse-Osmosis...sidZp1742.m153.l1262?_trksid=p1742.m153.l1262
better get clearance on this one huh? ....well maybe not we'll see how it goes...

I cant wait to see this bad boy in person. Very well done man your kickin my ass at setups

 

[zennzzo]

I think now I got the electrics laid out I need to cut out the Black Plexi pannel...

I'll have Pix as soon as PhullTank and I devour some BEEF!!
I just told him I'm fire'in up the BBQ, so we'll see if he's late for Lunch...

 

[PhullTank57]

okay, on my way there now!!

 

[Yanbbrox]

Nice plumbing Zen, you and Phull enjoy the BBQ