Very cool F1. What are the plants latching on to?
Sent from my iPhone using MonsterAquariaNetwork app
Sent from my iPhone using MonsterAquariaNetwork app
Thanks! The stems across the edge of the ceiling are simply held on by a 1/2" long screw, just drilled them in at a 45° angle and they hold the stems nicely, as for the ones on the mounted directly vertical I used picture frame hangers, used the same screws and the stems fit nicely, only have two of those. The rest are hanging off the blinds or those plate things. Very simple and hopefully growth will go more rapid!Very cool F1. What are the plants latching on to?
Sent from my iPhone using MonsterAquariaNetwork app
PH will not change, the only parameters that will change are nitrates for sure and depending on the cycle of the tank it can take out ammonia/nitrite if the nitrogen cycle is not complete which makes this plant very good for starting a tank!I have a question. I'm starting an aquaponic farm and I wanted to know if the plants would lower ph or mess with any other water parameters.
Sent from my SPH-L720T using MonsterAquariaNetwork App
They will be fine, my almost 2 year old plant has roots that could easily fit an ac110 and if they were scrunched up it would be fine, now if you put 4 or more plants into it maybe it may not be 100% efficient but for sure your setup is completely adequate!I have a question as well...will the plants just stop growing once the roots have no where else to grow? Just wondering because there's not a ton of room in the aquaclear 110s even with half sponge..will they just hit the bottom and stop growing?
Sent from my SCH-I545 using MonsterAquariaNetwork App
That really looks great. I'm inspired to turn one of my tanks back into a piranha set upOh and I thought I may as well post a pic when the water change was completed and the black water extract was added! Looks natural IMO View attachment 1016501
×Go S. Vettel #1 Infiniti Redbull! 4x WDC!!! Congrats on another flawless title× <GET BETTER SCHUMI>
__________________________________________________________________
Cheap way to decrease nitrates and keep your fish healthy: http://monsterfishkeepers.com/forums/showthread.php?t=504763
Thanks! As messy and big nitrate producers as red belly Piranha are this only makes pothos that much more needed! I'd love to see you make a nice bw tank, a big piece of dw is what really makes a piranha tank pop!That really looks great. I'm inspired to turn one of my tanks back into a piranha set up
Sent from my iPhone using MonsterAquariaNetwork app
I've tried many over the years, including Indiana almond leaves, peat moss, tons of dw etc.F1 what kind of BWE did you use? I'm looking for a good one.
Sent from my iPhone using MonsterAquariaNetwork app
This is a decent method but for larger tanks its just harder to calibrate the amount needed and the water chemistry being changed, plus scooping out rotting leaves sucks not to mention piranha tanks need a good current/filtration and in my tank they don't just stay on the bottom, they clog the intake of my filter. I've tried using them in a filter sock like a tea bag but compared to 'Microbe lift Amazon Bio colorant' its to much work and money.You can use indian almond leaves. They will leach tannins.
Sent from my SCH-I535 using MonsterAquariaNetwork App
Usually one decent bushel plant seems to be good for 3 to 5 6-8" fish, which in average cuts nitrates in half. I'd say 4 decent sized plants for a 300gal will cut nitrates in half given a med/high Bio load! Also depends on lighting and other factors.I do have a build form on here but nothing really on it were getting a slower start then originally thought. Just got the greenhouse and we have the tanks (2 300 gallon stock tanks) we just need to get it all together and build the tables that the plants are going to be in.
Any clue on how many fish to how many plants.
Sent from my SPH-L720T using MonsterAquariaNetwork App