tank conversion 5000 to 10000 gallons
- Thread starter johnptc
- Start date
good thing you have a forklift to move all those massive fish around... i know, I know you do it by hand but soon enough you will need to borros seaworlds's slings...
espetialy when you build your 40 thousand tank in two years...
espetialy when you build your 40 thousand tank in two years...
pic of plexi being prepped for tank...card board and red tape protect the viewing area
pic of SS cross tie being test fit one of four to take the load off the walls....3/4 inch SS all thread...will need to be in tension at around 3000 lbs when the tank is full
plumbing inside and out...note the skimmer which is mounted too low and will be raised. the bigger stuff is all sch 80 3 inch
pic of SS cross tie being test fit one of four to take the load off the walls....3/4 inch SS all thread...will need to be in tension at around 3000 lbs when the tank is full
plumbing inside and out...note the skimmer which is mounted too low and will be raised. the bigger stuff is all sch 80 3 inch
Good viewing area.
By the way, are you able to post of a pic of the whole room/shed/building that these tanks are in?
By the way, are you able to post of a pic of the whole room/shed/building that these tanks are in?
