600 gallon acrylic tear down and rebuild or roll the dice?
- Thread starter bluehand
- Start date
Really was a heck of a score across the board, esp with those 2 sumps also. Nice to see u turn it around so quick
And better yet he threw in 2 Jebao return pumps and these Fluval lightsReally was a heck of a score across the board, esp with those 2 sumps also. Nice to see u turn it around so quick
Pretty similar to the way it was braced before from what is left, I assume this would be adequate?
Attachments
How thick is the a acrylic on the current bracing vs. what u bought? IMO u dont need the long one across the length. If acrylics are eurobraced like this, youd usually go one brace under that lip thats already there, then another brace directly on top of that to double up the thickness of the brace. 5’ is a pretty large span for just 1 piece across not sandwiched. Dont want it to sag down in the middle of the span. U can do 2 braces spaced evenly sandwiched. Or honestly im thinking even place 3 of those u have in the center butted next to each other under that current lip then the other 2 on top of those in the middle for 1 beefy arse brace in the center. Ill try to get u a pic before i head out for work today
Bracing that I just picked up and the euro bracing that is on the tank are both 1/2How thick is the a acrylic on the current bracing vs. what u bought? IMO u dont need the long one across the length. If acrylics are eurobraced like this, youd usually go one brace under that lip thats already there, then another brace directly on top of that to double up the thickness of the brace. 5’ is a pretty large span for just 1 piece across not sandwiched. Dont want it to sag down in the middle of the span. U can do 2 braces spaced evenly sandwiched. Or honestly im thinking even place 3 of those u have in the center butted next to each other under that current lip then the other 2 on top of those in the middle for 1 beefy arse brace in the center. Ill try to get u a pic before i head out for work today
Perfect… should all match up flush then on top if u sandwich/double up the pieces. It will take alot of solvent to melt them together but itell b worth it. U can 40 or 16 them together also if u have those left.
Might have to go with the two sandwiched braces evenly spaced. When the bracing was cut out they left these parts on and they are dead center of the tank.How thick is the a acrylic on the current bracing vs. what u bought? IMO u dont need the long one across the length. If acrylics are eurobraced like this, youd usually go one brace under that lip thats already there, then another brace directly on top of that to double up the thickness of the brace. 5’ is a pretty large span for just 1 piece across not sandwiched. Dont want it to sag down in the middle of the span. U can do 2 braces spaced evenly sandwiched. Or honestly im thinking even place 3 of those u have in the center butted next to each other under that current lip then the other 2 on top of those in the middle for 1 beefy arse brace in the center. Ill try to get u a pic before i head out for work today
