Can you tell what it is yet? Construction has started!

[Satan's Goldfish]

Liking the blue!

Steve

I feel it has been the better choice than the pre-treated green i originally picked up, but b&q wouldn't cut treated stuff so had to go untreated so they'd cut it to fit in the car!

those are some fancy joints you've been cutting mate, rather impressed! puts my mitres to shame

keep it up, wish i was as far forward as yours!

TBH, they went better than i thought they would! Was expecting a massive fail as soon as the chisell got near them.

 

[Satan's Goldfish]

Some blue bits. Fixing brackets...erm...fitted! End that's easy to reach screwed down and clamps removed. Center cross beams sat in place. All the pipes will be run underneath in the pond when the filter gets moved. End with corner support for filter just sat on for now as need to get into pond to straighten the tarp and liner and fix it down but can't get wet while i'm still recovering from op (didn't think of that when i started this!) Looks like the filter box is going to sit in that corner quite nicely. But it's all in place ready to start measuring out for the next lot of cutting.

 

[Satan's Goldfish]

Looks like i got just enough wood, no room for error though

 

[spwd]

Looking good buddy,have you decided what your using for the top of the bar?


Steve

 

[Satan's Goldfish]

Looking good buddy,have you decided what your using for the top of the bar?


Steve

I think so. Got 3 very long chunky bits of wood over at my parents place from an old work bench that was in a garage i helped take down for them last summer and i was going to se them to build a work bench here but not really got the space for them. So they'd make a good bar. Just need a bit of cleaning, smoothing, and fitting together then sealing up to be a bar. Got no idea how i'm going to get them here though, each one is probably over 12ft long. I'll need to fix something along the back of it too so drinks and bits don't accidently get pushed off the back.

 

[Arkangel77]

intresting

 

[caresses]

big catfish!

 

[MRS SATAN]

I think so. Got 3 very long chunky bits of wood over at my parents place from an old work bench that was in a garage i helped take down for them last summer and i was going to se them to build a work bench here but not really got the space for them. So they'd make a good bar. Just need a bit of cleaning, smoothing, and fitting together then sealing up to be a bar. Got no idea how i'm going to get them here though, each one is probably over 12ft long. I'll need to fix something along the back of it too so drinks and bits don't accidently get pushed off the back.

y dnt u put clear plastic at the back of it then its splash prove and easy 2 wipe aswell less wok 4 me or u 2 do

 

[Satan's Goldfish]

intresting

big catfish!

And they're only gonna get bigger

y dnt u put clear plastic at the back of it then its splash prove and easy 2 wipe aswell less wok 4 me or u 2 do

Possibly, not sure clear would look right with the roofing bits that are gonna be behind it. Thinking part in front of the filter tall enough to hide the filter and fit optics too as i haven't put 'em back up yet. Depends how secure it all feels.

 

[MRS SATAN]

And they're only gonna get bigger



Possibly, not sure clear would look right with the roofing bits that are gonna be behind it. Thinking part in front of the filter tall enough to hide the filter and fit optics too as i haven't put 'em back up yet. Depends how secure it all feels.

ok but the optics bit u cud but baton behind the plastic 2 make it stronger if thats how u wanted it