DIY Multi aquarium stand

[broken]

.

 

[broken]

I just took meashurements of the 75gal and it doesnt fit in stand.
I guess i'll have to just put it on the side for now and do a build like nolapete with it later.

 

[gomezladdams]

Super sturdy looking build.Good luck with it.

 

[broken]

I didnt make any progress lately because i found a 640gal that i am like 99 percect sure that i am getting. this means that i will have to totally tear down this setup and start from scratch incorperating the 640 in it.
i am about to start drawing a mock up of what its going to look like on google scetch and if i can figure out how to post it i will.

 

[broken]

front veiw

front veiw

back view,

this is what its going to look like if i decide to buy the 640gal.
the big tank is the 640(duh).
the smaller one is going to be a 100gal growout tank.
there is going to be a 150 to 200 gal sump undernethe the growout tank for both tanks and 2 x fx3's on the 640gal.
there is going to be a 150gal water conditioning and heating tank on top so dont have to stretch a hose pipe across the inside my house to get heated water anymore.
Dont worry about the weight on top of everything because the frame will be made of 6inch ''I'' beams that can hold a lot more weight that this setup.

This will only happen if i decide 100percent that i am buying the 640gal.

 

[broken]

the total setup will be 16ft wide and 6ft tall (not including top tank).
the 640gal is 8ft wide and 4ft tall.

 

[broken]

If i do decide to buy the 640 i will start a new build thread and just let this one go.